Reactivos e instrumentos para inmunología, biología celular y biología molecular.
 
> Verteporfin [129497-78-5]

Verteporfin [129497-78-5]

Imprimir Imprimir
Por favor conéctese

Referencia HY-B0146-10mg

embalaje : 10mg

Marca : MedChemExpress

Solicitar más información

Contact local distributor :


Teléfono : +1 850 650 7790

Descripciòn

Verteporfin (CL 318952) is a photosensitizer for photodynamic therapy to eliminate the abnormal blood vessels in the eye associated with conditions such as age-related macular degeneration. Verteporfin is a YAP inhibitor which disrupts YAP-TEAD interactions. Verteporfin induces cell apoptosis[1]. Verteporfinis an autophagy inhibitor that blocks autophagy at an early stage by inhibiting autophagosome formation[3].

IC50 & Target

IC50: YAP-TEAD interaction
In Vitro

Verteporfin is specifically selected by PDX-cell screening. The concentrations to cause 50% growth inhibition (GI50) for PhLO, PhLH, and PhLK are 228 nM, 395 nM, and 538 nM, respectively, whereas GI50 for ALL-1, TCC-Y/sr, and NPhA1 are 3.93 μM, 2.11 μM, and 5.61 μM, respectively. GSH significantly reduces the sensitivity of 2 out of 3 PDX cells to verteporfin. Verteporfin reduces the mitochondrial membrane potential in PDX cells[1]. Verteporfin reduces the PTX-resistance on HCT-8/T cells by inhibiting YAP expression and combination therapy with verteporfin and NSC 125973 shows synergism on inhibition of YAP and cytotoxicity to HCT-8/T[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Verteporfin Related Antibodies

Solvente y solubilidad
In Vitro: 

DMSO : 50 mg/mL (69.56 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

DMF : 10 mg/mL (13.91 mM; ultrasonic and warming and heat to 60°C)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.3912 mL 6.9561 mL 13.9123 mL
5 mM 0.2782 mL 1.3912 mL 2.7825 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 5 mg/mL (6.96 mM); Clear solution

    This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 5 mg/mL (6.96 mM); Clear solution

    This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  50% PEG300    50% Saline

    Solubility: 1 mg/mL (1.39 mM); Suspended solution; Need ultrasonic

  • Protocol 2

    Add each solvent one by one:  15% Cremophor EL    85% Saline

    Solubility: 10 mg/mL (13.91 mM); Suspended solution; Need ultrasonic
Pureza y Documentación
Referencias

Usted podría estar interesado también en los siguientes productos:



Referencia
Descripción
Cond.
Precio Sin IVA
abx131047-100ul
Fibrinopeptide A (FPA) Antibody
 100ul 
A12658-25
Verteporfin [129497-78-5]
 25mg 
A12373-10
Z-VAD-FMK [187389-52-2]
 10mg